Find the Leak. Without Wrecking Your Walls.
Hidden leaks turn into mould, rot, and insurance headaches fast. A Sasquatch plumber tracks down the source before we open a single tile — then we fix it, document it, and clean up after ourselves.
Non-destructive detection first. Repair second.
The old way of finding a leak: cut open a wall, guess. The Sasquatch way: methodical pressure testing, moisture tracking, and process-of-elimination diagnostics to narrow the leak down before we touch anything — then a targeted opening, not exploratory drywall demolition. Less damage, faster repair, and cleaner insurance documentation.
Slab leaks
Water lines under a concrete slab are the worst kind of leak to find — and the most expensive when someone guesses wrong. We locate first, then decide between spot repair, re-route, or full re-pipe.
In-wall pipe leaks
Slow drips inside a wall show up as bulging paint, stains, or a musty smell weeks before they show up as a puddle. We find and fix them before the drywall fails.
Supply line & fixture leaks
Toilet seals, angle stops, dishwasher supply lines — the boring stuff that causes 80% of home water damage claims. We replace failed hardware and pressure-test the fix.
When to call us about a leak
- Your BC Hydro or water bill jumped for no reason — often the first (and only) sign of a hidden supply leak.
- You hear water running when nothing is on — pressure loss inside a wall, ceiling, or under a slab.
- Warm spot on the floor — hot water slab leak.
- Musty smell, stained drywall, or peeling paint — leak that’s been quietly going for weeks.
- Water meter spins when everything is off — active leak, somewhere between the meter and the fixtures.
- Toilet ghost flushes on its own — internal seal is leaking. Small fix now, big flooring bill later.
Insurance-ready documentation
If your leak is covered by insurance, the adjuster needs photos, a written cause-of-loss, and a repair invoice. We put together all three for every leak we find — clean, timestamped, and worded the way adjusters actually accept. No back-and-forth, no chasing paperwork.
Fixed pricing, guaranteed repair
The detection is flat-rate. The repair is quoted separately once we know what we’re fixing — and we always show you the leak on the camera or thermal image before we open anything. Every fitting is pressure-tested and photo-documented before we close the wall.